TGPS-W9442GF EN50155 10-port managed PoE Ethernet switch
EN50155 10-port managed Gigabit PoE Ethernet switch
Downloads:
The TGPS-W9442GF-MM-M12X-QS-MV-IP67, which is compliant with the EN50155 standard, is a managed Gigabit Redundant Ring Ethernet switch with 4x10/100/1000Base-T(X) P.S.E. and 4x10/100/1000Base-T(X) and 2x1000Base-SX Q-ODC ports which is specifically designed for the toughest and fully compliant with EN50155 requirement. The switch supports Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection), O-Chain, MRP*NOTE and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. It is specifically designed for the toughest industrial environments. TGPS-W9442GF-MM-M12X-QS-MV-IP67 EN50155 Ethernet switch uses M12 connectors to ensure tight, robust connections, and guarantee reliable operation against environmental disturbances, such as vibration and shock. TGPS-W9442GF-MM-M12X-QS-MV-IP67 also supports Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each TGPS-W9442GF-MM-M12X-QS-MV-IP67 switch has 4x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. While TGPS-W9442GF-MM-M12X-QS-MV-IP67 complies with EN50155, the switch supports a wide operating temperature from -40 oC to 75 oC. TGPS-W9442GF-MM-M12X-QS-MV-IP67 can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration.
|
0/100/1000Base-T(X) with P.S.E. Ports in M12 Auto MDI/MDIX |
4(8-pin female X-coding connector) |
| 10/100/1000Base-T(X) Ports in M12 Auto MDI/MDIX | 4(8-pin female X-coding connector) |
| 1000Base-X Fiber Ports in Q-ODC connector | 2 x Q-ODC connector (Multi-mode) |
| RS-232 Serial Console Port | RS-232 in M12 connector (female A-coding). Baud rate setting: 115200bps, 8, N, 1 |
| Fiber Ports Specification | |
| Fiber Ports Number | 2 |
| Fiber Ports Standard | 1000Base-SX |
| Fiber Mode | Multi-mode |
| Fiber Diameter (µm) | 62.5/125 µm @ 50/125 µm |
| Fiber Optical Connector | Q-ODC |
| Typical Distance (Km) | 0.55 Km |
| Wavelength (nm) | 850 nm |
| Max. Output Optical Power (dbm) | -4 dbm |
| Min. Output Optical Power (dbm) | -9.5 dbm |
| Max. Input Optical Power(Saturation) | 0 dbm |
| Min. Input Optical Power(Sensitivity) | -18 dbm |
| Link Budget (db) | 8.5 db |
| Technology | |
| Ethernet Standards |
IEEE 802.3 for 10Base-T |
| MAC Table | 8K |
| Priority Queues | 8 |
| Processing | Store-and-Forward |
| Switch Properties |
Switching latency: 7 us |
| Jumbo frame | Up to 9.6K Bytes |
| Security Featues |
Device Binding security feature |
| Software Features |
STP/RSTP/MSTP (IEEE 802.1D/w/s) |
| Network Redundancy |
O-Ring |
