PEAK 887VL2 PICMG 1.3 Full-size SBC 4th Gen i7/i5/i3
PICMG 1.3 Full-size SBC with Intel® Q87 Support 4th Generation Intel® Core™ i7/i5/i3 Processors
Enquire Now
Enquire about this product:
PICMG 1.3 Full-size SBC with Intel® Q87 Support 4th Generation Intel® Core™ i7/i5/i3 Processors
· Scalable platform 4th generation Intel® Core™ i7/i5/i3 processor + Non-ECC
· Intel® Q87 PCH chipset support PICMG 1.3 specification
· Support Dual channel DDR3L with NON-ECC DIMMs 1333/1600MHz up to 16GB
· Support PCIex16, 4x PCIex1, 4x USB 3.0/ 4x USB 2.0, 4x SATA 3.0/ 2x SATA 2.0 and GbE
· Display support for VGA, DVI, HDMI
· Dimension 338.58 x 126.39 mm2 (W x L) (8 Layers Single side)
| CPU Support | 4th generation Intel® Core™ i7/i5/i3 processor (95W/ 65W/ 45W/ 35W) TDPs, Socket LGA 1150 |
| Main Memory | 2 x DIMM, support Dual channel DDR3L (default)/ DDR3 NON-ECC DIMM (dual voltage models by auto detection for DDR3 and DDR3LMaximum 16 GB – 1066/1333/1600 MT/S |
| Platform Control Hub | Intel® Q87 Express Chipset PCH |
| BIOS | AMI system BIOS16MBit SPI depended on AMT functionDual BIOS for Four PCIex1 and One PCIex4 (setting by DP switch) |
| Display | The Processor Graphics contains a refresh of the seventh generation graphicsIntel® HD Graphics GT1 / GT2Share system memoryAnalog Display SupportDrive a standard progressive scan analog monitor |
| Audio | Reverse HDA interface, 2.0mm 2x5 pin header |
| On-board LAN | 1x Intel® I217LM GbE PHY1x Intel® I211 Gigabit Ethernet ControllerRJ45 with LED connecter x 2Support Boot From LAN (PXE)RJ45 LEDSupport Wake on LANExtra (External) LED: 2 x 4 pin header |
| I/O Interface | ITE8783PS2 KB/MS reserve 1x6 (2.0m) JST connector26-pin Box Header x 1 (2.0mm)SIO Box Header x 4 (2.0mm), COM1,3,4 support RS232, COM2RS232/422/485, RI pin can be select RI/5V/12V with jumper (2x3 pin 2.0mm pin-header)4 Ports USB 2.0 and 4 ports USB 3.0: 2 ports through 2.5mm JST Connectors, located near Rear Side of PCB (near CPU, USB3.0) 4 ports through backplane (USB 2.0)2 ports through I/O bracket (USB 3.0)4-pin FAN connector x 2 (for CPU,System)On board pin header for IrDA Tx Rx 1x5/2.54mm pin-headerHDD LED/ Power LED/ Power ON SW/ Reset SWOn Board buzzerUSBx1/ USBx1/ LAN1 RJ45 x1/ LAN2 RJ45 x1/ VGA DB15 from top to down |
| Power Requirements | Power source from Backplane through Golden Finger and AUX +12VSupport ATX/AT function by jumper settingBIOS default is (ATX MODE) |
| Dimensions | 338.58mm x 126.39mm, 8 layers (single side) |
| Environment | Board Level Operating temperatures: -15°C to 60°CStorage temperatures: -20°C to 85°CRelative humidity: 10% to 90% (operating, non-condensing) 5% to 95% (non-operating, non-condensing) |
| Certifications | CE approvalFCC Class ACB/CCC certification |
