VTC7230 - i3-5010U, 3x sim support, 2x SATA SSD

In stock
SKU:
VTC7230
Brand: Nexcom

Intel® Core™ i3-5010U Fanless In-Vehicle Computer


Enquire Now
Enquire about this product:

Intel® Core™ i3-5010U Fanless In-Vehicle Computer

 

·         Intel® Core™ processor dual core i3-5010U

·         Three SIM cards + dual WWAN modules support

·         Dual accessible & hot swappable SATA 3.0 SSD/HDD (RAID 0/1)

·         Built-in u-blox NEO-M8N module, optional Dead Reckoning support

·         Built-in CAN 2.0B. Optional CAN/OBDII module

·         Wake on RTC/SMS via WWAN module

·         Voice communication via WWAN module

·         Compliant with MIL-STD-810G

·         4 x mini-PCIe socket rich expansion capability


This product is listed in Mobile Computing, Mining, Transport

 


CPU

 Intel® Core™ processor dual core i3-5010U, 2.1GHz

Memory

2 channel 204-pin DDR3L SO-DMIM socket support 1333/1600MHz up to 16GB, default 2GB

Storage

2 x 2.5" SATA 3.0 SSD/HDD (externally accessible), RAID 0,1 supported (optional lockable storage available)

1 x CFast (externally accessible)

Expansion

1 x full size Mini-PCIe socket (USB 2.0)

1 x full size Mini-PCIe socket (USB 2.0 + PCIe)

1 x full size Mini-PCIe socket (USB 2.0 + PCIe)

1 x half size Mini-PCIe socket (USB 2.0 + PCIe)

Function

1 x default U-blox UBX-G6010 GPS module (50-channel and GALIELO) or optional modules with Dead Reckoning or GLONASS support Built-in G-sensor

I/O Interface-Front

4 x LED for power, storage, WWAN, WLAN

2 x externally accessible SATA 3.0 SSD/HDD tray, RFID 0, 1 supported (optional lockable storage available)

1 x dual USB type A connector for USB 3.0 port + USB 2.0 port

2 x externally accessible SIM card socket (selectable)

1 x phone jack 3.5mm

1 x Mic-In

1 x phone jack 3.5mm

1 x Line-Out

1 x externally accessible CFast card socket with cover

1 x event button (trigger type)

1 x reset button

3 x antenna hole for WWAN/WLAN/BT

I/O Interface-Rear

1 x 9~36VDC input with ignition

1 x dual USB type A connector for USB 3.0 port + USB 2.0 port

2 x RJ45 10/100/1000 Fast Ethernet with LED

1 x phone jack 3.5mm 

1 x Mic-In

1 x phone jack 3.5mm

1 x Line-Out with 1.5W output each                    

1 x DB-15 VGA. Resolution up to 2560 x 1600 @60Hz

1 x DP port. Resolution up to 2560 x 1600 @60Hz

2 x DB-9 RS-232

1 x DB-9 RS-232/422/485 (RI/5V/12V selectable)

1 x DB-9 for CAN 2.0B (optional CAN Bus 2.0B Mini-PCIe card)

2 x MCU-DI

2 x MCU-DO

1 x 16-pin terminal block

1 x CAN Bus 2.0B (on board)

1 x optional OBDII module (ASE J1939 or J1708)

8 x Programmable GPIO
(Digital Input)
Input voltage (internal type): 5VDC TTL (default)
Input voltage (source type): 3~12VDC
(Digital Output)
Digital Output (sink type): 5VDC TTL (default), max current: 20mA
Digital Output (source type): 3~24VDC, max current: 150mA 1 x 12VDC output (2A), SM Bus 4 x antenna hole for WWAN/ WLAN/ BT/GPS 1 x Fuse (15A)

Power Management

Selectable boot-up & shut-down voltage for low power protection by software Setting 8-level power on/off delay time by software Status of ignition and low voltage can be detected by software Support S3/S4 suspend mode

Operating System

Windows 8, WES8 Window 7, WES7 Linux kernel 3.X

Dimensions

260 mm (W) x 206 mm (D) x 79.5 mm (H) (10.24" x 8.11" x 3.13") Weight: 2.5kg

Environment

Operating temperatures : Ambient with air -30°C to 60°C Storage temperatures : -35°C to 85°C