The quad-core 1.5GHz Intel Atom x6413E processor in the VTC 1031 has powerful graphic and multimedia enhancement. For vehicles with little room for a computer system, VTC 1031 is a fanless, robust, and small inclosure. For vehicle diagnostics and managing driver behaviour, there is an onboard CAN 2.0B and an optional OBD interface (SAE J1939). In addition to supporting GPS+QZSS, GLONASS, Galileo, and Beidou, an advanced GNSS receiver also offers optional dead reckoning. WLAN (Wi-Fi 5/6/6E) and WWAN (LTE/5G NR) wireless data are available on the VTC 1031. The user can easily access the micro-SIM card thanks to the dual micro-SIMs and one micro-SIM with an external access design. For a dependable artificial intelligence (AI) platform, the VTC 1031 is equipped with an optional M.2/mPCIe AI accelerator module. It is also intended for cutting-edge AI vehicle solutions.
Key Features:
Intel Atom x6413E quad-core processor, 9W
Compact and fanless design
5G NR and Wi-Fi 6/6E wireless communication options
Built-in U-Blox M9N GNSS, optional dead reckoning support
Intel Atom x6413E quad-core processor, 1.5GHz, TDP 9W
Memory
1 x 260-pin DDR4 SO-DIMM socket support 3200MHz up to 32GB. Default 2666MHz, 4GB
With In-Band ECC (IBECC)
Video Output
1 x HDMI 1.4b up to 3840 x 2160@30Hz
1 x VGA port 1920 x 1200@60Hz
Storage
1 x 2.5” SATA 3.0 internal drive bay (9.5mm)
1 x M.2 key M 2280 for SATA 3.0
Expansion
1 x Full-size mini-PCIe socket (USB 2.0, PCIe 3.0), BOM optional M.2 3042 Key B socket (USB 2.0, USB 3.2 Gen 2) for LTE/5G NR module with 1 x internal micro-SIM and 1 x external micro-SIM
1 x M.2 2230 Key E socket (USB 2.0, PCIe 3.0 x2), BOM optional M.2 2230 Key E socket (USB 2.0, PCIe 3.0, PCIe 3.0)
1 x M.2 3042/3050/3052 Key B socket (USB 2.0, USB 3.2 Gen 2) for LTE/5G NR module with 1 x internal micro-SIM and 1 x external micro-SIM
GNSS and Onboard Sensor
1 x Default U-Blox NEO-M9N GNSS module for GPS+QZSS/Glonass/Galileo/Beidou
Optional M8U/M8L modules with dead reckoning available
1-Port LAN RJ45, 10/100/1000 Mbps Ethernet, Marvell Ethernet PHY 88E1512
2-Port LAN RJ45, 10/100/1000 Mbps Ethernet, PoE 802.3af/at, max 60W (VTC 1031-C2)
Security
TPM 2.0: Infineon SLB9670VQ2.0 FW7.62
I/O Interface-Front
6 x LED indicators (including 1 x programmable LED)
1 x USB 3.2 Gen 2 type A (5V/0.9A)
1 x USB 2.0 type A (5V/0.5A)
1 x Externally accessible micro-SIM card sockets with cover
1 x Reset button
1 x Power button
1 x DB9 (COM) for full RS232/422/485
1 x Mic-in, 1 x Line-out
1 x DB9 for Expansion Port (optional)
2 x RJ45 PoE, including 2 x PoE LED light (VTC 1031-C2)
4 x SMA connector holes for WWAN (VTC 1031)
I/O Interface-Rear
1 x HDMI
1 x VGA
1 x LAN (LAN1) RJ45, 10/100/1000/2500 Mbps
1 x LAN (LAN2) RJ45, 10/100/1000 Mbps
2 x USB 2.0 type A (5V/0.5A)
1 x DB26 (MULTI-PORT) - 1 x Isolated CANBus 2.0B - 1 x RS232 Tx/ Rx - 1 x GNSS Speed/Direction - 5 x DI and 4 x DO - 2 x RS485 - 12V/ 2A DC output - GND
1 x 3-pin terminal block for power/ignition input
1 x SMA connector for GNSS
2 x SMA connector holes for WWAN
3 x RP-SMA connector holes for WLAN
Power Management & Software Support
Power input 9~36VDC
Cranking voltage: 6V~9V (< 30 seconds)
Reverse protection, OCP & UVP
Selectable boot-up & shut-down voltage for low power protection by software
Setting 8-level power on/off delay time by software
10~255 seconds WDT support, setup by software
SDK (Windows/Linux) including utility and sample code
Operating System
Windows 11/Windows 10/Linux
Dimensions
180mm (W) x 180mm (D) x 50mm (H)
Weight
VTC 1031: 1.91kg
VTC 1031-C2: 2.0kg
Environment
Operating temperatures - -40°C to 70°C (w/ industrial SSD) with air flow
Storage temperatures: -40°C to 85°C
Relative humidity: 90% (non-condensing)
Vibration (random) - 2g@5~500 Hz (in operation, SSD)
Vibration (SSD) - Operating: MIL-STD-810H, Method 514.8C, Procedure 1, Category 4, common carrier US highway truck vibration exposure - Storage: MIL-STD-810H, Method 514.8E, Procedure 1, Category 24, minimum integrity test
You have to 