In stock
Brand: Lantech

Model Code: IPES-5408DFT-X

- EN50155/61373/45545-2 certified
- Optional 12V input boost to 48V output for IEEE802.3at/af max.80W
- Optional 72V input steps down to 48V output for IEEE 802.3at/af max.80W

Enquire Now
Enquire about this product:


IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX
IEEE 802.3ab 1000BaseT
IEEE802.3z Gigabit fiber
IEEE802.3x Flow Control and Back Pressure
IEEE802.3ad Port trunk with LACP
IEEE802.1d Spanning Tree
IEEE802.1w Rapid Spanning Tree
IEEE802.1s Multiple Spanning Tree
IEEE 802.3ad Link Aggregation Control Protocol (LACP)
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
IEEE 802.1X User Authentication (Radius)
IEEE802.1p Class of Service
IEEE802.3at/af Power over Ethernet

Switch Architecture

Back-plane (Switching Fabric): 9.6Gbps
Packet throughput ability (Full-Duplex): 23.8Mpps @64bytes

Transfer Rate

14,880pps for Ethernet port
148,800pps for Fast Ethernet port
1,488,000pps for Gigabit Fiber Ethernet port


Marvell 800Mhz


256M Byte


128M Byte

Mac Address

16K MAC address table

Jumbo frame

9KB on all ports


10/100TX: 8 x ports M12 4-pole D-coded with Auto MDI/MDI-X function
100/1000 Dual Speed Fiber: 2 x IP67 LC Q-ODC connector for single-mode or multi-mode type fiber cable
10/100/1000T: 2x ports M12 8-pole X-coded with Auto MDI/MDI-X function
RS-232 connector: 1 x M12 5-pole A-coded
Power Input connector : 1 x M23 5-pole A-coded
Relay contact : 1 x M12 5-pole A-coded

Network Cable

10Base-T: 2-pair UTP/STP Cat. 3, 4, 5/ 5E/ 6 cable
EIA/TIA-568 100-ohm (100m)
100Base-TX: 2-pair UTP/STP Cat. 5/ 5E/ 6 cable
EIA/TIA-568 100-ohm (100m)

Giga Optical Cable

Multi-mode: 50/125um~62.5/125um
Single mode: 9/125um
Available distance: 0.5km (Multi-mode)/10km (Single-mode)
Wavelength: 850nm (Multi-mode)/850nm (Single-mode)

100M Optical Cable

Multi-mode: 50/125um~62.5/125um
Single mode: 9/125um
Available distance: 2km (Multi-mode)/10km (Single-mode)
Wavelength: 850nm (Multi-mode)/850nm (Single-mode)

Bypass Protection**

High-speed Copper switching (<4ms)
Minimal insertion loss (Max 1.6dB as Bypass Mode)




Per unit: Power 1 (Green), Power 2 (Green), P-Fail (Red)
Ethernet port: Link/Activity (Green), Speed (Green); Optical fiber: Link/Activity (Green)


1 Digital Input (DI) :
Level 0: -30~2V / Level 1: 10~30V
Max. input current:8mA
1 Digital Output(DO): Open collector to 40 VDC, 200mA

Operating Humidity

5% ~ 95% (Non-condensing)

Operating Temperature

-40°C~75°C / -40°F~167°F
(72V/110V model: -40°C~60°C / -40°F~140°F)

Storage Temperature

-40°C~85°C / -40°F~185°F

Power Supply

45~56VDC on standard model
9.5~56VDC on 12V model
50.4~90VDC on 72V model
43~160VDC on 110V model with input isolation

PoE Budget

240W for 802.3at 54V input
120W for 802.3af 48V input
80W for 12V input
120W for 24V input
80W for 72V Input
80W for 110V input

PoE pin assignment

M12 port # 1~#8 support IEEE 802.3at/af End-point, Alternative A mode. Per port provides 30W PoE at/ 15W PoE af.

Power Consumption

Max. 13W 12V~48VDC input
Max. 16W 72VDC/110VDC input

Case Dimension

IP67 model: Aluminum case


1.4kgs (IP67)


DIN Rail** and Wall Mount Design


FCC Class A,
CE EN61000-6-2, CE EN61000-6-4, CE EN61000-4-2, CE EN61000-4-3, CE EN61000-4-4, CE EN61000-4-5, CE EN61000-4-6, CE N61000-4-8, EN61000-4-11

Stability Testing

IEC60068-2-32 (Free fall), EN61373 (Shock and Vibration)



Certifications& report

EN50155/EN50121-3-2/EN50121-4 Certificate
EN45545-2 R24/R25 (EN ISO 4589-2, EN ISO 5659-2, NF X70-100-1 & 2) Fire & Smoke Certificate


5 years