IGPS-9822DGP+ 12-port managed PoE/Fibre Ethernet switch

In stock
SKU:
IGPS-9822DGP+
Brand: ORing
Enquire Now

Please fill in your details below, we will get back to you as soon as possible

  • Support O-Ring (recovery time < 30ms over 250 units of connection) and MSTP(RSTP/STP compatible) for Ethernet Redundancy
  • Open-Ring support the other vendor’s ring technology in open architecture
  • O-Chain allow multiple redundant network rings
  • *note Support standard IEC 62439-2 MRP (Media Redundancy Protocol) function
  • 8 port P.S.E. fully compliant with IEEE802.3at standard, provide up to 30 Watts per port
  • Support PoE scheduled configuration and PoE auto-ping check function
  • Support IEEE 1588v2 clock synchronization
  • Support IPV6 new internet protocol version
  • Support Modbus TCP protocol
  • Support IEEE 802.3az Energy-Efficient Ethernet technology
  • Provided HTTPS/SSH protocol to enhance network security
  • Support SMTP client
  • Support IP-based bandwidth management
  • Supports backup unit device DBU-01 to quickly configuration backup/restore

*NOTE: This function is available by request only

Physical Ports  

10/100/1000Base-T(X) with P.S.E. ports in RJ45 Auto MDI/MDIX

8
100/1G/2.5GBase-X with SFP port 2
1G/10GBase-X with SFP port 2
Technology  
Ethernet Standards

IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3ab for 1000Base-T
IEEE 802.3z for 1000Base-X
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol )
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1d for STP (Spanning Tree Protocol)
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
IEEE 802.3af/at PoE specification

MAC Table 32k
Priority Queues 8
Processing Store-and-Forward
Packet Buffer 32Mbits
Switch Properties

Switching latency: 7 us
Switching bandwidth: 66Gbps
Throughput (packet per second) : [email protected] packet
Max. Number of Available VLANs: 4096
VLAN ID Range : VID 0 to 4095
IGMP multicast groups: 64 for each VLAN
Port rate limiting: User Define

Jumbo frame Up to 10K Bytes
Security Featues

Device Binding security feature
Enable/disable ports, MAC based port security
Port based network access control (802.1x)
VLAN (802.1Q ) to segregate and secure network traffic
RADIUS/TACACS+ centralized password management
SNMPv3 encrypted authentication and access security
HTTPS / SSH / SSL enhance network security
DOS/DDOS auto prevention
IP Source Guard

Software Features

Redundant Ring (O-Ring) with recovery time less than 30ms
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging
IGMP Snooping
IP-based bandwidth management
Application-based QoS management
Port configuration, status, statistics, monitoring, security
DHCP Server/Client/Relay
SMTP Client
Modbus TCP
NTP server/client
UPnP

QoS

TOS/Diffserv supported
CoS
Application based QoS
IP based bandwidth management

Network Redundancy

O-Ring
O-Chain
*note MRP
STP/RSTP/MSTP (IEEE 802.1 d/w/s)

RS-232 Serial Console Port RS-232 in RJ45 connector with console cable. 115200bps, 8, N, 1
LED Indicators  
Power Indicator (PWR) Green : Power LED x 3
Ring Master Indicator (R.M.) Green : Indicates that the system is operating in O-Ring Master mode
O-Ring Indicator (Ring) Green : Indicates that the system operating in O-Ring mode
Green Blinking : Indicates that the Ring is broken.
Fault Indicator (Fault)

Amber : Indicate unexpected event occurred

10/100/1000Base-T(X) RJ45 Port Indicator (Upper) Dual color LED: Green for 1000Mbps Link/Act indicator. Amber for 100Mbps Link/Act indicator, OFF for 10Mbps Link/Act
PoE Indicator RJ45 Port (Lower) Amber : PoE enable
1G/2.5GBase-X SFP Port Indicator

Green LED for Link/Act

1G/10Gbase-X SFP Port Indicator Green LED for Link/Act
Fault Contact  
Relay Relay output to carry capacity of 1A at 24VDC
Reset Function  
Reset Button < 5 sec: System reboot, > 5 sec: Factory default
Power  
Redundant Input Power Dual DC inputs 50~57VDC on 6-pin terminal block
Power consumption (Typ.)

19 Watts

Total PoE power budget 240W max, 30W per port
Overload current protection Present
Reverse Polarity Protection Present
Physical Characteristics  
Enclosure IP-30
Dimensions (W x D x H) 74.3 (W) x 125 (D) x 153.6 (H) mm (2.93 x 4.92 x 6.05 inches)
Weight (g) 1078 g
Environmental  
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -40 to 75°C (-40 to 167oF)
Operating Humidity 5% to 95% Non-condensing
Regulatory Approvals  
EMC CE EMC (EN 55024, EN 55032), FCC Part 15 B
EMI EN 55032, CISPR32, EN 61000-3-2, EN 61000-3-3, FCC Part 15 B class A
EMS EN 55024 (IEC/EN 61000-4-2 (ESD), IEC/EN 61000-4-3 (RS),IEC/EN 61000-4-4 (EFT), IEC/EN 61000-4-5 (Surge), IEC/EN 61000-4-6 (CS), IEC/EN 61000-4-8(PFMF), IEC/EN 61000-4-11 (DIP))
Shock IEC60068-2-27
Free Fall IEC60068-2-31
Vibration IEC60068-2-6
Safety EN60950-1
MTBF 497728 hrs
Warranty 5 years
We build to order