Tekdis Products

WSB-H610

Category: Core-i Series

Downloads

CPU

LGA1155 socket supports Intel® Core™ i7/i5/i3/Pentium®/Celeron® processor

PCH

Intel® H61

BIOS

UEFI

System Memory

Two 240-pin 1333/1066MHz dual-channel DDR3 & DDR3L (1.35V) DIMMs supported (system max. 16GB)

Ethernet

Dual Realtek RTL8111E PCIe GbE controllers (LAN1 with ASF 2.0 support)

I/O Interface

2 x RS-232

1 x RS-422/485

1 x LPT

1 x FDD

1 x PS/2 KB/MS

1 x 6-pin wafer for KB & MS

7 x USB 2.0 (1 on rear, 6 by pin header)

4 x SATA 3Gb/s (H61 doesn't support AHCI & RAID)

Digital I/O

8-bit digital I/O (4-bit input, 4-bit output)

Super I/O

Fintek F81866

TPM

2 x 10-pin header

SMBus

1 x 4-pin wafer

Audio

Supports 7.1 channel HD audio by IEI AC-KIT-888HD kit

Display Interfaces

1 x VGA

1 x DVI-D (via header to IO-KIT-001-R20 DVI-D/USB module) (optional)

Expansion

PCI signal and ISA signal via golden finger

Watchdog Timer

Software programmable supports 1~255 sec. system reset

Power Supply

5V/12V, AT/ATX support

Power Consumption

This email address is being protected from spambots. You need JavaScript enabled to view it., This email address is being protected from spambots. You need JavaScript enabled to view it., This email address is being protected from spambots. You need JavaScript enabled to view it., This email address is being protected from spambots. You need JavaScript enabled to view it.

(3.4GHz Intel® Core™ i7-2600K with two 2GB 1333MHz DDR3 memory)

Graphic

Intel® HD Graphics Gen 6 supports for DX10.1 and OpenGL 3.0

Full MPEG2, VC1, AVC Decode

Operating Temperature

-10°C ~ 60°C

Humidity

5% ~95%, non-condensing

Dimensions

338 mm x 122 mm

Weight

GW: 1000g/NW: 260g

Embedded Controller

ITE IT8519E

Front Panel

1 x Front panel (power LED, HDD LED, speaker, power button, reset button)

I2C

1 x 4-pin wafer

PCIe-PCI Bridge

ITE IT8892E

PCI-ISA Bridge

ITE IT8888G

Fan Connector

1 x 4-pin smart Fan Connector

1 x 4-pin system Fan Connector

Ask about this product

Captcha Image Reload image challenge


Comments